Winter Brick Sessions

By the time I finished work last night it was already getting dark, and my breath stood heavy on the quickly chilling evening air … and I wanted to get in a brick session, I thought it may be a bit dangerous out on the bike in rush hour traffic in the dark so the plan was to hit the gym and the spin bike for the firs segment then outside for the run. After all the weather/conditions in the UK really fall to where you cant get outside and run and treadmills are the invention of the devil.

So since it was going to be the spin bike I decided to push a heavy load and work my HR aiming to sit just below my Vo2 max (85-90% of) with recoveries dropping to 75% (just above the point where my lactic levels start to rise). The work out looked like :-

10min warm up
10 x (
- 2min heavy standing
- 1min heavy seated
- 1min spinning seated (rec)
- 1min heavy seated
)
8 x (
- 40secs heavy standing
- 80secs heavy seated
- 40secs heavy standing
- 80secs heavy seated
- 1min spinning seated (rec)
)
5 x (
- 1min heavy standing
- 1min heavy seated
- 1min spinning seated (rec)
)
5mins spinning

So 2 hours in total on the bike, by now I was drenched in sweat so I had a quick towel down pulled on my jacket and out the door I was.  The sky was clear and star filled (even amongst the light pollution) and I quickly started to feel the sweat in my hair start to freeze so I decided that I should go for a decent pace to keep mw warm, aiming for 80-85% MHR.

The first part of the run was flat allowing me to maintain my HR then as I approached the end of my loop it was time for hill reps … or hill sprints to be exact:

8 x 45sec hill sprints | walk back recoveries

The aim on these sprints is to really push myself and maintain a long stride length throughout, I time for first sprint and at my end point, so I always run the same distance for each sprint but by the last sprint it may be taking me longer than 45secs … but you get the point.

My session was finished off with a jog back to the gym, strides and stretching ….

Total run time 40mins

Not a bad midweek session … well for me

WW

Cycling Physiological Assessment (Part 2)

Interpreting the results …

Having all that data is one thing but understanding what it means and how to make use of it is another, the output from the assessment was a personalised 13 page report, which took a few days to prepare, that combined my results with my sporting aims (endurance as opposed to sprint) but briefly here are some points that came form the report …

Firstly my training zones: -

ZONE	HR	GUIDELINES
1	to 112bpm	Used for recovery purposes. Early winter training, or as a training zone if you build up extensive miles (6 hours/day)
2	114bpm -147bpm	Foundation of endurance training. Develops lactate removal capabilities and extensive overload on the mechanisms of aerobic respiration. The level where training induces performance improvements.
3	148bpm -162bpm	This is intensive training. This will bring your form forward to a peak. It is probably easier to do this type of training in an interval format, as it is simply difficult to maintain this intensity for long periods without the ‘racing’ motivation. The level three training sessions will be quite short.
4	162bpm +	Intensive intervals to top your form off. Monitoring of heart rate is usually not needed. Can be developed to enhance sprinting and time trialling.

Next my weight, as can be seen I an quite a bit heavier than the elite or age grouper (although taller) so I could do with dropping some weight, this will not improve my cycling but will help improve my power to weight ratio (currently 3.06W/kg) my aim is to drop about 6kg which by itself will help me realise a .25W/kg improvement and help with my climbing (which has always a problem)

Improving maximum power and oxygen consumption (and helping push up my VO2max) will be a case of training mid to longer training sessions in Zone 2 with mid (upper mid) zone having the most benefit and save most of the Zone 3+ work until after base training. To ensure control over this factor the use of turbo / spinning bike will be adopted in the off season

My strength is not very good (283w max power) so that is another area I need to work on during the off season and this needs to be both cycling specific and generic.  The cycling specific work will be taking the form of hill reps and be complicated with some off season gym work focusing on strength endurance this will help me push up my wattage and therefore improve my cycling weight to strength ratio.

So that is what my plan is based on at the moment and I will be going back to get retested in the new year to see what effect my training is having and this will co-inside with me commencing a specific Ironman training program.

Les Mills RPM

I have discussed spinnervals on here before, they are DVDs to do your turbo training to, well a few weeks back some gave me a few workout DVDs, a couple were Les Mills RPM ‘s.

Les Mills RPM is a spinning work out to be done on a spinning bike; well I have my own spinning bike so i’ve been giving these a try out. Today I did RMP 39 which is a 1hr spinning class to a range of music (much better music than spinnervals) and this DVD fairly gets the hear racing, leaving puddles of sweat on the floor.

For me the DVD is not quiet long enough so I normally repeat a number of the working tracks but that isn’t a problem a quick flick of the remote and I continue uninterrupted, all-in-all a great alternative when looking for options for indoor cycling.